|
Saddle Connector
(Reduces
length version)
Non tension Saddle connector for ACSR, AAC & AAAC.
"HEX" saddle
connector are designed for non - tension service and jumper
connection. For making connection between aluminium overhead
conductors and copper service conductors, the grease filled aluminum
tube should be used.
|
Main Conductor Dia. Range (mm) |
Max. Combined Conductor Dia. (mm) |
Non Dimensions (mm) |
Current Rating A |
Product code |
|
A |
B |
C |
D |
E |
F |
|
4.5 - 9.3 |
18.6 |
40 |
20 |
13.3 |
22 |
60 |
9.6 |
90 |
MASC-18 |
|
9.3 - 16.2 |
26.0 |
|
|
|
|
|
|
140 |
MASC-26 |
INSTALLATION INSTRUCTIONS :
1. Prepare the conductor by
applying a suitable grease and abrading through the grease.
2. Remove the keeper assembly and
fit the connector body into the connector.
3. Insert the other connector
& replace the keeper assembly, finally tightening the bolt securely.
NOTE:
For copper service conductor the aluminum tube should first be
pushed fully over the copper conductor and any surplus grease wiped
off. Ensure that the copper conductor is below the aluminum
conductor. Connection made in accordance with the above instruction
meet the electrical & mechanical requirements of the electricity
supply industry.
|
